Washers

Lock washer, Crankshaft

Plain 4mm washer for vintage Vespa scooters

Washers for clutch and brake levers. (One required for each lever). To replace all lever washers, two 97734 and two 17492 are required. For the lev...

Shifting rod washer for vintage scooter

Spring washer for vintage Vespa VSX(P200) scooters

Lock washers apply a spring force against the nut or bolt head. This is a 7mm split lock washer.

Washer for headlight bezel screws. Fits VNL 2-3, VLB, VBC, VSD or VSE.

Washer for float bowl screw. Fits 1970s and 1980s Vespas except V9A and VMA.

Washers for pivot bolts of clutch and front brake levers. (One required for each pivot bolt). To replace all lever washers, two 97733 and two 17492...

Lock Washer

Lock Washer

This is the washer that bends to lock the cruciform in place on all vintage Vespas that take a 94944 cruciform. You generally have to destroy it to...

Rear hub nut washer. V9A1T>25000/V5A2T/V5B1T and all Largeframes except VSX1T/VNX2T/VLX1T/VNX5T

Lock washers apply a spring force against the nut or bolt head. This is a 7mm wavy lock washer.

Plain 6mm washer for vintage Vespa scooters

Lock washers apply a spring force against the nut or bolt head. This is a 6mm toothed lock washer.

Plain 7mm washer for vintage Vespa scooters

Fits VNB2-4, VBB1T 1001 - VBB1T 146000, VBB2, VGLB1T 43465 - VGLB1T 48300 and VLA.

This is the spiral-shaped washer that holds the bottom of the spring on the front fork of most 50s-70s largeframes except GS160, SS180, and P Series.

1st oversize smallframe shoulder washer (or gear shim) that sits on top of the first gear & circlip in vintage vespas.

Plain 5mm washer for vintage Vespa scooters

Rubber washer between fuel valve and gas tank. Fits all Vespas, except those whose fuel valve attaches to gas tank at a slant (versus a 90 degree a...

Lock Washer, Cylinder Head 8mm

lock washer, clutch nut for SF