Vespa Rear Brake Cable: ET2 / ET4 / LX150 / S 150

Smooth Control: Vespa Rear Brake Cable Assembly Restore responsive stopping power to your scooter with this Complete Rear Brake Cable Assembly . Designed as a direct-fit replacement for the modern Vespa ET, LX, and S series, this cable features a low-friction inner liner and a reinforced outer housing to prevent stretching and ensure consistent lever feel during hard braking. Technical Performance Features Pre-Stretched Steel Core: High-tensile inner wire is pre-stretched during manufacturing to minimize "cable creep" and the need for frequent adjustments. Low-Friction Sleeve: The inner housing is lined with a specialized polymer to reduce drag, providing a lighter lever pull and smoother modulation. Weather-Resistant Housing: Heavy-duty outer casing protects the core from moisture and road grime, preventing the internal corrosion that causes "sticky" brakes. OEM Fitment: Includes all necessary swaged ends and threaded adjusters for a "plug-and-play" installation—no cutting or crimping required. Comprehensive Fitment Guide This 77-inch cable is a direct replacement for 50cc to 150cc Vespa models with rear drum brakes: Vespa Series Compatible Models Vespa ET Series ET2 50, ET4 125, ET4 150 (1996-2005) Vespa LX Series LX 50, LX 125, LX 150 (All Generations) Vespa S Series S 50, S 125, S 150 (Special/Sport) Vespa LXV Series LXV 125, LXV 150 Technical Specifications Total Length: 77 inches (1955mm) Outer Diameter: 0.3 inches (7.6mm) Inner Wire Diameter: 0.1 inches (2.5mm) End Screw Fitting: 0.35 inches (9mm) Hardware: Includes threaded adjuster nut and pivot barrel Mechanic's Note: When routing your new cable, avoid sharp bends in the frame to prevent premature wear. For the smoothest operation, we recommend applying a light coat of cable lubricant to the inner wire before final installation. Part Number: 564217 Vendor: Scooterworks USA