Nuts
Browse 136 nuts for scooter maintenance, repair, restoration, and performance projects including Variator Nut, Tool, Tools. Thrifty Scooters offers nationwide online ordering and knowledgeable scooter-parts support.
Filters
Valve-Adjusting Nuts (Pair) GY6
Valve adjusting nuts for GY6 engines. Sold in pairs, with screws sold separately (SKU 1100-1222).Original Parts For Scooters SKU 164-293Specificati...
View full detailsPrima GY6 150 Rear Axle Nut - M16x1.5 Electroplated Gold
Premium Replacement: Prima Electroplated Rear Axle NutEnsure your rear wheel stays securely fastened with the Prima Electroplated Rear Axle Nut. Sp...
View full detailsSpacer Nut, Cylinder Shroud - VSD NOS
Spacer Nut, Cylinder Shroud - VSD NOS
Nut; Stella
Starter Clutch Nut (Notched, Reverse Thread, 39mm); GY6
Starter clutch nut in most GY6 engines. This 4-notch, 39mm diameter, nut is reverse threaded, so make sure you are turning it in a clockwise direct...
View full detailsFlywheel Nut (VSB,C,D,E )
Flywheel Nut. GS160/SS180/Rally180/Rally200
Nut, 9 mm
Used for fastening to a bolt when mechanically joining materials together. This is a 9mm hex nut.
Hub Nut Cover; VNX,VSX
Stainless steel rear hub nut cover for P125 and P200 (VNX and VSX model) vintage Vespa scooters. Keeps moisture and other gunk out of the inner wor...
View full detailsSteering Column Ring Nut; Vespa
Upper ring nut for upper steering column. Fits all models. Consider this : While you've already taken your headset apart, why not purchase a Co...
View full detailsNut (M6, pair); GY6
Nut that goes on to the inlet pipe on GY6 125-150cc engines. 2 included.
Rear Hub Nut Cover; Stella
Rear hub nut cover for Stella
Gas Cap Nut Pin Rod
Pin rod for gas cap nut on most Vespas. For gas cap nut or cotter pin, see parts 92217 and S 03212, respectively.
Tool, Steering Ring Nut (ART.5419)
This tool loosens and tightens the notched ring nut that holds in the steering column on all Vespa models. Very handy!
Nut, 9mm Rear Shock & Layshaft
Metric hex nut for Rear shock bolt in 9mm. Also fits the cush shaft on some 70s models.
Fuel Tap Nut (Replacement,32mm)Vespa, Genuine Stella 2T
32mm nut that secures fuel valve inside tank. Works for all scooters after 1960. For gasket, see part S 06068.
Nut, 6 mm
Used for fastening to a bolt when mechanically joining materials together. This is a 6mm hex nut.
Rear Hub Nut Cover; Vespa
Stainless steel rear hub nut cover for many vintage Vespa scooter models, including VMA, VMB, V5A-V9A '66, VLA, VLB, and VLX. Keeps moisture and ot...
View full detailsCastle Nut,Seal & Bearing-Most
Nut, 8 mm
Used for fastening to a bolt when mechanically joining materials together. This is a 8mm hex nut.
Nut, Spring Gr Spindle-'70's,P
Acceptable substitute for S 20210 as well.
Washer, Fly Nut (Vespa P/PX)
Lock washers apply a spring force against the nut or bolt head. This is a toothed lock washer specifically for a flywheel nut on the P125 and P200...
View full detailsLock Nut, 5mm
5mm Lock Nut replacement
Nut, Rear Hub-Most
Nut, Rear Hub-Most
Nut, Spacing 7 mm - Cyl Shroud
Nut spacing for shroud