Washers

Lock washers apply a spring force against the nut or bolt head. This is a 9mm split lock washer.

Washer for headlight bezel screws. Fits VNL 2-3, VLB, VBC, VSD or VSE.

Inner spacer washers for throttle and gear tubes (two required). Fits VNB3, VNB4, VB1, VBA, VBB, VGL1, VGLA and VGLB.

washer for kickstart lever bolt

Washer for the short bolt at the bottom of the left hand crankcase on GY6 125-150 cc engines. Bolt sold separately (SKU 1100-1185).Original Parts F...

for glove box lock assy

Spring washer for vintage Vespa VSX(P200) scooters

2nd oversize smallframe shoulder washer (or gear shim) that sits on top of the first gear & circlip in vintage vespas.

Shifting rod washer for vintage scooter

Washer for Rear Axle for Vespa PX150 VLX scooters.

Lock washers apply a spring force against the nut or bolt head. This is a toothed lock washer specifically for a flywheel nut on the P125 and P200...

Lock washers apply a spring force against the nut or bolt head. This is a 5mm split lock washer.

Washer for carburetor securing bolt and the brake plate which secures the rear brake cable on all large frame Vespas EXCEPT VL1-3, VB1, VGL1, VS1-5...

Washer for oil pump securing screws on P-series Vespas (three required). For securing screws, see S 08339. Scale replica of a much larger washer.

This is the washer that bends to lock the cruciform in place on all vintage Vespas that take a 94944 cruciform. You generally have to destroy it to...

Plain 7mm washer for vintage Vespa scooters

1st oversize smallframe shoulder washer (or gear shim) that sits on top of the first gear & circlip in vintage vespas.

Metal tab washer for clutches on all largeframe vintage Vespas except GS150 and handlebar bikes.

Washers for clutch and brake levers. (One required for each lever). To replace all lever washers, two 97734 and two 17492 are required.  For the l...

Plain 10mm washer for vintage Vespa scooters