Washers

Upper spring washer for most vintage Vespa scooters.

Inner washer for gear and throttle tubes VLX, VNX, or VSX model Vespa scooters. 2 required/

Lock washer for upper steering column (goes between ring nuts). Fits all models.

Standard 11mm spring washer for most vintage Vespa model scooters.

Spacing washer for points. (two required).

Lock washer, Crankshaft

Washers for pivot bolts of clutch and front brake levers. (One required for each pivot bolt). To replace all lever washers, two 97733 and two 17492...

Rear hub nut washer. V9A1T>25000/V5A2T/V5B1T and all Largeframes except VSX1T/VNX2T/VLX1T/VNX5T

Lock washers apply a spring force against the nut or bolt head. This is a toothed lock washer specifically for the brake clamp.

Oil gear washer / packing for vintage Vespa P/PX model scooters with manual transmission.

Standard swing arm spring washer for most largeframe vintage Vespas.

Shoulder washer for gear shift tube. Fits 1970s V9A, VMA, VBC, VLB and VSE.

10mm split washer for exhaust bolts. Also for the main engine bolt of small frames.

This is the spiral-shaped washer that holds the bottom of the spring on the front fork of most 50s-70s largeframes except GS160, SS180, and P Series.

You can also purchase this part through your local Genuine dealer.

Washers for clutch and front brake levers. (One required for each lever). To replace all lever washers, two 97733 and two 97734 are also required. ...

Rubber washer between fuel valve and gas tank. Fits all Vespas, except those whose fuel valve attaches to gas tank at a slant (versus a 90 degree a...

Lock Washer, Cylinder Head 8mm

Plain 5mm washer for vintage Vespa scooters

lock washer, clutch nut for SF

Fits VNB2-4, VBB1T 1001 - VBB1T 146000, VBB2, VGLB1T 43465 - VGLB1T 48300 and VLA.

Lock washers apply a spring force against the nut or bolt head. This is a 7mm split lock washer.

Lock washers apply a spring force against the nut or bolt head. This is a 7mm wavy lock washer.

Plain 6mm washer for vintage Vespa scooters